Primary Flight Simulator

Aileron:

Aileron is the control of roll axis. Aileron’s task is to make turn movement of aircraft. It is conrolled by the joystick or lever. There are one aileron in right wing and left wing. Large jet passenger and cargo aircraft has two aileron in each wing. After a certain speed of such aircraft wingtip ailerons instead uses aileron close to the fuselage. Aileron simultaneously and asymmetric (in reverse order) as they work. So while the aileron on the left wing is above , on the right side is below. Thus, our plane will turn the direction is wanted.

Rudder:

It is the yaw axis control. This flight control surfaces make the yaw of the aircraft. Rudder is moveable part in aircraft's tail. It is controlled by pressing the pedals in the cockpit. When you press the left pedal rudder turns left and air flow creates a force on the rudder and nose of the plane allows to turn left.

Elevator:

It is the pitch axis control. This flight control surfaces on aircraft make the pitching motion. Thus, aircraft can gain or lose altitude. This control is achieved in three ways. It is controlled by joystick or lever.

If we pull the lever aircraft begins to climb.

If we push the lever forward aircraft begins to descend.